Loader
Optics

Beam shaper [GTH]

GTH-S-4.0-2.0

  • - Square Top Hat
  • - > 95 % efficiency
  • - 100 µm to 5 mm Top Hat width
  • - coatings for UV to IR
  • - 4 mm input beam diameter, 2 mrad fan angle

SPECIFICATIONS

SPOT GEOMETRY
Top Hat width full fan angle of 2 mrad
Efficiency > 95% (depends on the coating type)
Homogeneity about ± 5% (rel. to average intensity of the Top Hat plateau)
Depth of the Top Hat shape (DOF) Depends on the optical setup; for example 1.5mm depth using 4.0mm beam diameter, wavelength 532nm and 250mm focal length.
REQUIREMENTS FOR THE USE OF GTH-S-5.0-16.0
Input beam single or multimode laser beam with Gaussian energy distribution
Input beam diameter 4.0 mm @1/e²
Apertures within the optical setup clear aperture along the whole beam path should be at least 2.5x larger than the beam diameter @ 1/e²
INTEGRATION OF GTH-S-5.0-16.0 INTO THE BEAM PATH
Alignment alignment in lateral direction is necessary (translation). Rotating the shaper around the optical axis is helpful to align the orientation of the Top Hat. We recommend our mount HSF02.
Optical equipment required: focusing optic to generate the Top Hat in the focal plane of this optic.

useful: beam expander to firstly adjust the effective beam dia. to the design input beam dia. of GTH-S-4.0-2.0 and secondly adjust the beam dia. to the desired spot size.

helpful: beam profiler to check profiles while aligning.
SUBSTRATE SPECIFICATIONS
Material fused silica
Dimension1) dia. 1 inch x 3 mm
Standard AR/AR coatings1), transmission and laser damage threshold @ UV 210 – 400 nm; T > 96%; LDT 1 J/cm² @ 10 ns

@ VIS 400 – 700 nm; T > 98%; LDT 2 J/cm² @ 10 ns

@ IR 650 – 1100 nm; T > 98,5%; LDT 3 J/cm² @ 10 ns
ORDER INFORMATION
Product code GTH-S-4.0-2.0- AR coating type
Example GTH-S-4.0-2.0-VIS → GTH-S-4.0-2.0 including AR @ 400 – 700 nm
1) Others on request

GTH-S-4.0-6.0

  • - Square Top Hat
  • - > 95 % efficiency
  • - 300 µm to 15 mm Top Hat width
  • - coatings for UV to IR
  • - 4 mm input beam diameter, 6 mrad fan angle

SPECIFICATIONS

SPOT GEOMETRY
Top Hat width full fan angle of 6 mrad
Efficiency > 95% (depends on the coating type)
Homogeneity about ± 5% (rel. to average intensity of the Top Hat plateau)
Depth of the Top Hat shape (DOF) Depends on the optical setup; for example 3.5mm depth using 4.0mm beam diameter, wavelength 532nm and 250mm focal length.
REQUIREMENTS FOR THE USE OF GTH-S-5.0-16.0
Input beam single or multimode laser beam with Gaussian energy distribution
Input beam diameter 4.0 mm @1/e²
Apertures within the optical setup clear aperture along the whole beam path should be at least 2.5x larger than the beam diameter @ 1/e²
INTEGRATION OF GTH-S-5.0-16.0 INTO THE BEAM PATH
Alignment alignment in lateral direction is necessary (translation). Rotating the shaper around the optical axis is helpful to align the orientation of the Top Hat. We recommend our mount HSF02.
Optical equipment required: focusing optic to generate the Top Hat in the focal plane of this optic.

useful: beam expander to firstly adjust the effective beam dia. to the design input beam dia. of GTH-S-4.0-6.0 and secondly adjust the beam dia. to the desired spot size.

helpful: beam profiler to check profiles while aligning.
SUBSTRATE SPECIFICATIONS
Material fused silica
Dimension1) dia. 1 inch x 3 mm
Standard AR/AR coatings1), transmission and laser damage threshold @ UV 210 – 400 nm; T > 96%; LDT 1 J/cm² @ 10 ns

@ VIS 400 – 700 nm; T > 98%; LDT 2 J/cm² @ 10 ns

@ IR 650 – 1100 nm; T > 98,5%; LDT 3 J/cm² @ 10 ns
ORDER INFORMATION
Product code GTH-S-4.0-6.0- AR coating type
Example GTH-S-4.0-6.0-VIS → GTH-S-4.0-6.0 including AR @ 400 – 700 nm
1) Others on request

GTH-S-5.0-16.0

  • - Square Top Hat
  • - > 95 % efficiency
  • - 800 µm to 40 mm Top Hat width
  • - coatings for UV to IR
  • - 5 mm input beam diameter, 16 mrad fan angle

SPECIFICATIONS

SPOT GEOMETRY
Top Hat width full fan angle of 16 mrad
Efficiency > 95% (depends on the coating type)
Homogeneity about ± 5% (rel. to average intensity of the Top Hat plateau)
Depth of the Top Hat shape (DOF) Depends on the optical setup; for example 4mm depth using 5.0mm beam diameter, wavelength 532nm and 250mm focal length.
REQUIREMENTS FOR THE USE OF GTH-S-5.0-16.0
Input beam single or multimode laser beam with Gaussian energy distribution
Input beam diameter 5.0 mm @1/e², tolerance ± 0.1 mm
Apertures within the optical setup clear aperture along the whole beam path should be at least 2.5x larger than the beam diameter @ 1/e²
INTEGRATION OF GTH-S-5.0-16.0 INTO THE BEAM PATH
Alignment alignment in lateral direction is necessary (translation). Rotating the shaper around the optical axis is helpful to align the orientation of the Top Hat. We recommend our mount HSF02.
Optical equipment required: focusing optic to generate the Top Hat in the focal plane of this optic.

useful: beam expander to firstly adjust the effective beam dia. to the design input beam dia. of GTH-S-5.0-16.0 and secondly adjust the beam dia. to the desired spot size.

helpful: beam profiler to check profiles while aligning.
SUBSTRATE SPECIFICATIONS
Material fused silica
Dimension1) dia. 1 inch x 3 mm
Standard AR/AR coatings1), transmission and laser damage threshold @ UV 210 – 400 nm; T > 96%; LDT 1 J/cm² @ 10 ns

@ VIS 400 – 700 nm; T > 98%; LDT 2 J/cm² @ 10 ns

@ IR 650 – 1100 nm; T > 98,5%; LDT 3 J/cm² @ 10 ns
ORDER INFORMATION
Product code GTH-S-5.0-16.0- AR coating type
Example GTH-S-5.0-16.0-VIS → GTH-S-5.0-16.0 including AR @ 400 – 700nm
1) Others on request

Beam shaper [FBS]

FBS

  • - Square Top Hat
  • - Efficiency > 95 %
  • - Top Hat dia. : several μm - 150 μm
Parameters
Efficiency > 95% of input energy within Top Hat profile
Transmission > 99%, incl. AR/AR coating
Material UV Fused Silica
Dimensions dia. 25.4mm/thickness 3mm
Damage threshold 4J/cm² @ 532nm and 10ns
Select beam diameter d (@1/e2) 1.0, 1.5 … 10.0mm
Tolerance for input beam diameter < ±10%
Select wavelength/AR coating (standard) 1064/1030nm, 532/515nm, 355/343nm
Others sizes and wavelengths on request
Model No: FBS-beam diameter-wavelength

FBS2

  • - Square Top Hat
  • - Improved DOF
  • - Top Hat dia. : several μm - 150 μm
Parameters
Efficiency > 90% of input energy within Top Hat profile
Transmission > 99%, incl. AR/AR coating
Material UV Fused Silica
Dimensions dia. 25.4mm/thickness 3mm
Damage threshold 4J/cm² @ 532nm and 10ns
Select beam diameter d (@1/e2) 1.0, 1.5 … 10.0mm
Tolerance for input beam diameter < ±10%
Select wavelength/AR coating (standard) 1064/1030nm, 532/515nm, 355/343nm
Others sizes and wavelengths on request
Model No: FBS2-beam diameter-wavelength

FBSR

  • - Square Top Hat
  • - Efficiency > 95 %
  • - Top Hat dia. : several μm - 150 μm
Parameters
Efficiency > 95% of input energy within Top Hat profile
Transmission > 99%, incl. AR/AR coating
Material UV Fused Silica
Dimensions dia. 25.4mm/thickness 3mm
Damage threshold 4J/cm² @ 532nm and 10ns
Select beam diameter d (@1/e2) 1.0, 1.5 … 10.0mm
Tolerance for input beam diameter < ±10%
Select wavelength/AR coating (standard) 1064/1030nm, 532/515nm, 355/343nm
Others sizes and wavelengths on request
Model No: FBSR-beam diameter-wavelength

Beam splitter

1-dimensional

Model Efficiency Product sheet
DBS-1X2
80
DBS-1X3
84
DBS-1X5
71
DBS-1X6
80
DBS-1X7
74
DBS-1X8
70
DBS-1X9
73

2-dimensional

Model Efficiency Product sheet
DBS-2X2
66
DBS-3X3
73
DBS-3X5
75
DBS-4X4
74
DBS-5X5
74
DBS-8X8
75
DBS-5/4
72
DBS-7/6
75
DBS-8/4
70

Mirrors for ultra fast

Wavelength range 190-3000 nm
Dimension 5-200 mm
Shape Round, rectangular, eliptical
Surface quality, S-D 10-5*
Surface flatness, P-V <λ/10 @ 632.8 nm*
Reflectance >99.8%
LIDT >20 J/cm² @ 1064 nm, 10 ns, 10 Hz

*depending on size